Sunday, January 8, 2012

AutoCAD for Mac


AutoCAD, the industry-standard Computer Aided Design (CAD) application from Autodesk, is back on the Mac after an 18-year hiatus. This is lovely news for lots of Mac fans in the architecture, engineering, and design professions who have been reluctant to give up their MacBook Pros and iMacs for the sake of a single application, despite its status as a important part of their workflow. With the new Mac version of AutoCAD for freeform 2D and 3D design and drafting, Mac users no longer need to make use of Boot Camp or Parallels or suffer a PC on the same table with their Mac.



In lieu of offering the ribbon-based interface of the Windows version, Autodesk has has selected to place more AutoCAD functions in the pulldown menus. Floating gizmo palettes also include most of the same tools as the menus, while the interface will look familiar to users of other Mac CAD applications. Autodesk has also taken advantage of multi-touch trackpad gestures (& offers similar moves on Apple's Magic Mouse () For example, two-finger swipes scroll up or down, pinching can zoom in or out, & a shift and two-finger swipe can rotate around a 3D model. Cover Flow navigation lets you flip through your designs. Nice

AutoCAD 2011 for the Mac is not a port from Windows. , Autodesk has programmed this version for the Mac from the ground up with a conscious work to take advantage of the Mac OS X interface.

While AutoCAD is a complex and powerful application, the technique requirements are higher than much of the competition on the Mac (such as Vectorworks (), TurboCAD (), and Ashlar-Vellum), beginning with a maximum of 3GB of RAM and higher screen resolution (1280 x 800 pixels). The program works with only with more recent Mac hardware such as Mac Pro (early 2009), MacBook Pro (mid-2009), and iMac (early 2008). To be fair, you'd require to make use of a high resolution monitor with a CAD program anyway, given the quantity and level of graphic detail you are usually working with. But, you are less likely to be disappointed with AutoCAD's performance in case you bought your Mac in the last couple of yearsWhile AutoCAD is a complex and powerful application, the technique requirements are higher than much of the competition on the Mac (such as Vectorworks (), TurboCAD (), and Ashlar-Vellum), beginning with a maximum of 3GB of RAM and higher screen resolution (1280 x 800 pixels). The program works with only with more recent Mac hardware such as Mac Pro (early 2009), MacBook Pro (mid-2009), and iMac (early 2008). To be fair, you'd require to make use of a high resolution monitor with a CAD program anyway, given the quantity and level of graphic detail you are usually working with. But, you are less likely to be disappointed with AutoCAD's performance in case you bought your Mac in the last couple of years.

When you first launch AutoCAD 2011, you will be introduced with the drawing canvas or Modelspace, the window where you will build your drawing or model. The menus are extensive, and the gizmo and information palettes are arranged to the left and right of the canvas.

of the first things you will notice is that the default background in AutoCAD is black or slate-colored with the lines and objects you draw in white (or bright colors). This differs from most Mac CAD or graphic design applications, which usually have a white background with black and color drawing elements on top. You can change the background color in the preferences and, in fact, much of the interface can be altered to fit your own tastes, including which tools show up in the palettes and where the palettes can be found on screen.

One interface element Autodesk brought over from the Windows version is the ViewCube, a useful graphical navigation element for controlling 3D views. It lets you rotate your drawing & model, or jump to standard 3D views & orientations with a single-click. The ViewCube rotates as you click on it, giving you a visual representation of your drawing at various angles. Moving around a 3D model can be disorienting, & the ViewCube does a lovely job of letting you know whether you are looking from above, below, or at some oblique angle.

Another uniquely AutoCAD interface element is the Command Line window. This has been an AutoCAD mainstay for lots of years. At first it looks like some DOS operating process throwback, but it is actually a very useful window because it displays in text format everything that is going on while you re drawing, line-by-line, command-by-command. Interestingly, it can operate both ways: you can enter text commands in to the window & control your drawing from the command line while maximizing the use of the keyboard & minimizing use of the mouse & menus. While overall that method of operation is not very Mac-like, in case you have been using the Windows version of AutoCAD for a very long time, this feature will be welcome.

From the Mac point of view, though, my largest complaint about the interface is that the method of drawing objects often includes more clicks than necessary, & can need the use of the keyboard.
For instance, drawing a simple line is not as simple as choosing the line gizmo and then clicking and dragging to generate the line. In AutoCAD, to finish the system of drawing the line, you require to hit another key such as Escape or Enter, or the Space Bar after the second click. Otherwise, you will keep adding more lines. Then, in the event you require to draw another line elsewhere, you require to pick the line gizmo again. No doubt, this is something you can get used to, but Id not must click so much.

While plenty of CAD programs can import & export DWG files, these translations sometimes need cleanup. Not having to worry about cleanup or whether your exported DWG files will open correctly is actual advantage of AutoCAD for Mac over other Mac CAD programs. I opened numerous DWG files received from Windows consultants I work with & AutoCAD for Mac opened most of them seamlessly. However, I did run in to a tiny number of drawings that necessary parts not obtainable for the Mac, such as some (but not all) ObjectARX parts my civil engineer makes use of. Some of these parts, made by third-party vendors, are widely used & personalize & extend AutoCAD. I hope that the developers of such parts update them for use on the Mac.

One of the reasons plenty of architecture firms use AutoCAD is the popularity of its file format. The DWG format native to AutoCAD is often used for collaborative work across a broad range of professions such as consultants, architects, and engineers.

This brings up the subject of add-ons for AutoCAD. thing that makes AutoCAD for Windows such a dominant product are all of the third-party extensions obtainable. In the Windows version, there's add-ons & extensions obtainable for any profession or specialty, & there's thousands of tools & scripts that you can add to AutoCAD that provide even more capabilities than are included in the basic application. A number of the add-ons are already obtainable for the Mac, but today, most are not. For example, I ran in to some missing extensions while trying to import AutoCAD files from a civil engineer I work with. Autodesk says it is working on having more extensions obtainable for later releases of the Mac program, & will be making the development of add-ons feasible on the Mac.

Like PDF, there's dozens of features in the Windows version that are not included in the Mac version. A quantity of them are important features such as Plot Style Configuration, Plot to File, or the Reference Manager.

One glaring feature missing from AutoCAD 2011 is support for importing and exporting PDF files. In the current version, there is no export or print-to-PDF feature from within AutoCAD. Using the print-to-PDF option in the standard Mac print dialog box gives poor results compared to other CAD programs with built-in PDF support (including AutoCAD for Windows). There is also no way to import a PDF file in to your drawing, another feature supported in the Windows version of AutoCAD, but not on the Mac.

With this first comeback version of AutoCAD, Autodesk appears to be applying the 80/20 rule for its Mac users, providing the 80 percent of features and tools that are used the most. I don't have a conceptual issue with that approach. It seems sane for such a immense program to implement the most important parts first and then fill inOn a positive note, Autodesk has a free iPhone/iPad app available in the iTunes store that lets you share and view AutoCAD files in the field. You may even do some light editing of the files right on your iPhone or iPad, including drawing new objects, moving, rotating, and annotating.

Tuesday, December 27, 2011

Low Cost Steel Detailing and Structural Steel Design Services


Outsourcing Steel Detailing firm is a leading steel design service provider company specializing in steel structure designing & steel detailing services. They offer custom-tailored 2D & 3D Steel Designing & Detailing solutions to help you turn today's challenges in to competitive advantage. They use application like AutoCAD, AutoSketch, Revit, Tekla, etc & web-based collaborating tools to provide you the benefits of low operating cost, superior services & efficient delivery schedule.

Steel structures are widely used in steel building designs & construction of residential steel building design. Structural Steel detailing is useful for all kind of steel structures ranging from residential buildings to massive commercial buildings. Steel structures can be designed or planned basically with less hard work & provides advantages like sturdiness, durability & portability. Structural steel services include designing dimensions & detailing of various Post-tensioned, Precast concrete detailing, Pre-stressed & Composite steel structures in accordance with industry standards & codes.

They have a massive pool of highly qualified steel detailers & structural steel engineers producing correct drawings of each structural element, their placements, connections between them & exact dimensions. This involves detailing of steel staircases, beams, plates, columns, bar joists, stack, decking/grating, etc. Our methodology is well defined & technique & result oriented. They put our best hard work to establish fruitful business partnership with our clients by ensuring exact, correct, high quality steel detailing services within the budget & on time.

They provide structural steel designs for industrial structures such as:
Steel buildings
Residential/Commercial buildings
Residential Steel framing
Warehouses
Sheds/Shelters/Roofs
Office blocks
Support structures
Floor systems/Mezzanines,
Miscellaneous Steel structures

Factors to be considered in the design of steel structures


All the members in the structure ought to have adequate strength, stiffness & toughness to be sure proper funtioning in the work of service life. Members ought to have adequate strength, stiffness & toughness to be sure propoer functioning in the work of service life.

Reserved strength must be obtainable to cater for:

Aim is to prevent limit state from being reached.
one. Adaptations to site:

Occasional overloads - underestimated lots
Variability of strebgth of materials from those specified.
Variation in strength due to workmanship, construction practices.

If the structure is a building, for example, the designer must generate a plan that has suitable arrangement for rooms, corridors, stairways, windows, elevators, emergency exits etc & all this plan ought to be adapted to site so that it is feasible, accepted aesthetically & at a reasonable cost. This is called funtional planning.
two. Structural system:

structural system is dependent on funtional planning. Structural system includes the location of columns in the buildings, it is to be worked out with the funtional plan & sufficent space must be anticipated between completed ceiling & completed floor for location of columns.
three. Structural analysis:

One time lots are defined & design is laid out, structural analysis must be performed to choose internal forces that will be produced in various members of the framework. Assumptions must be made & it ought to be ensured that structure in point of fact also behaves as it is meant to (& as it was assumed to behave).
four. Proportionality of members:

Members must be proportioned with factor of safety in mind.
five. Factor of safety:

Variability of the material with respect to strength & other physical properties
Uncertainity in the expected lots
Precision with which internal forces are calculated
Possibility of corrosion
Extent of damage, loss of life
Operational importance
Quality of workmanship

The development of design specifications to provide suitable values of the margin of safety, reliability & probability of failure must take in to consideration the following factors.

Advantages of LRFD


LRFD accounts for both variability in load and resistence. It achieves uniform levels of safety for different limit states.
Comparison of ASD & LRFD

Advantages of LRFD

ASD is the simple technique & LRFD is the sophisticated.
ASD combines dead and live lots and treats them in the same way.
In lrfd different load factors are assigned to dead lots and live lots, which is appealing.
Changes is load factors and resistence factors are much simpler to make in lrfd.

Mechanical properties of structural steel

Material
Length
X-section

Resistence to deformation based on:

Design technique

Preliminary member sizing of beams
Structural analysis - modeling, analysis
Design review - member modifications
Cost of estimation
Preparation of structural drawings and specifications
Lots for structural analysis and design
Dead load
Live load
Mean return period OR
Recurrence interval OR
Live lots for various occupencies
Reduction in basic design live load
Impact Load
Wind load

Load & Resistence Factor Design




It considers the variability not only in resistence but also in the effects of load.
Provides measure of safety relative.
Safety in the design is obtained by specifying that the reduced nominal strength of a designed structure is less than the effect of factored lots acting on the structure.

Redundancy:

Ability of a structure to go through in-elastic deformation without rupture.

Ductility:

It is the ability to resist abrasion.

Steel Strength:

it is the ability to redistribute the load. Simple beam is determinate. Fixed beam is indeterminate by two degrees so it's redundant actions. fixed supported beam is more better as indeterminate structure can redistribute the load. When load increases support becomes plastic & it turns in to a basically supported beam. But basically supported does not go through the stage of plastic hinge they fail directly.
Hardness:

Ability of a structure or structural part to absorb energy.
Fatigue:

Maximum load which an object can resist. OR it is the maximum load that the steel can resist before failure. Steel is said to be failed when it's yielded. It is thus called yield strength
Toughness:

It is a progressive, localized permanent destroy under fluctuating stress.

Structural Steel Design & Construction of Steel Structures



Design philosophies

A. Allowable stress design
B. working stress design (for concrete)
C. final stress design


What is meant be the design of structures?
Is it an arbitrary or scientific technique?
How to design a structural technique?
Parameters involved in the design?
What is meant by demand on structural technique & what is capacity of a structure?
Is demand related to capacity?

What are the requirements of steel design?

Topics to be studied & ideas to be learned

Demands: Snow, earthquake, live load etc.
Limit state:

A condition beyond which a structural technique or a structural part ceases to fulfill the funtion for which it is designed.
Examples of limit states :

A. Deflection
B. Fatigue
C. Shear
D. Buckling
E. Bearing
F. Cracking
G. Flexure
H. Torsion
I. Settlement
J. Stability

Strength limit states :
A. Flexure
B. Shear
C. Torsion

Serviceability limit states :
A. Cracking
B. Excessive deflection

Wednesday, September 7, 2011

How To Test Soil




I. PURPOSE
• Pricing Field Dry Weight Content.
• Determining the Degree of Soil Density.

II. BASIC THEORY
There are several methods used to calculate the weight of the contents of the field. Standard procedures used include:
a. Sand cone method
b. Rubber Balloon Method
c. Use of Nuclear Density Measurement.
Cone of sand (sand cone) consists of a plastic or glass bottle with a metal cone that is placed on it. Plastic bottles and cones of sand in dry Ottawa sand fill with sand, which is a standard that has a uniform gradation.
On the field made a small hole in the tube-shaped land that has been compacted. After the holes were dug, soil is weighed entirely original, with a bottle filled with sand cone placed over the hole so that it can obtain the contents of the dry weight of the compaction.

III. EQUIPMENT AND MATERIALS
Equipment
1. A set of tools sand cone.
2. Scales with 0.01 gram accuracy.
3. Cylinder of known volume.
4. Cans with lids
5. Term sliding
6. Meter.
7. Digger, shovels, spoons, screwdrivers, knives, etc.

Material
Ottawa sand with a uniform diameter and dry.

IV. STEP WORK
A. Determine the weight of sand in the funnel. (Wps.cr)
1. Prepare the equipment needed, by placing the bottle and funnel.
2. Ottawa sand bottles filled to the brim, valves closed and the remaining sand is cleaned and then weighed (W1) with the funnel in place.
3. Place on a flat field with the funnel facing down.
4. The tap is opened up to sand down and fill the funnel, after full faucet is closed.
5. Bottles plus a funnel and the remaining sand and then weighed (W2)
6. Then the weight of sand in the funnel is:
7. Wps.cr = W1 - W2

B. Determine the weight of sand in the cylinder (Wps.sl)
1. After the move, place the bottle on a cylinder that has been known volemenya (with the funnel facing down)
2. The tap is opened up to sand down to fill the cylinder and funnel, when the cylinder is estimated to have been fully tap is closed.
3. Bottle and funnel along with the rest of the sand 2 is calculated (W3)
4. Then the weight of sand in the cylinder
Wps.sl = W3 - Wps.cr

C. Determining the content of the dry weight of sand. (Γps)
How to calculate the weight of the contents of dry sand is by dividing the weight of sand in a cylinder with a cylinder volume, then:
γps =

D. Determine the volume of the cylinder (Vsl)
1. Calculate the weight of the cylinder (WSL)
2. Then calculate the volume of the cylinder, by measuring the radius (D), & high (t).
3. Then the volume of the cylinder is:
Vsl = ¼. Π.D2.t

E. Determine the volume of pits (VLB)
1. Full contents of the bottle in the sand plus the funnel and then weighed (WA).
2. Prepare digger and plastic.
3. Ground surface, at a predetermined point leveled and cleared.
4. By using the mall, made a hole as deep as 10-15 cm. In accordance with the height of the cylinder used to measure the weight of the contents of dry sand (B). All soil excavation should be collected in plastic, there should not be wasted and taken care not to change their water content (plastic while closed).
5. Place the bottle over the hole with a funnel facing down. Faucet is opened up to fill holes and sand down a funnel.
6. After the sand from the bottle does not go down anymore, faucets are closed, then weighed the bottle along with the rest of the sand (WB). Meanwhile above ground the excavation immediately weighed and measured water content in the soil until the hole is known weight (W), and its water level ()
7. Obtained the weight of sand in the funnel
Wps.cr = WA - WB
8. Calculate the weight of sand in the hole
Wps.lb = WC - Wps.cr
9. Volume obtained by dividing the weight pit of sand in the sand pit and gamma
VLB =
F. Determine soil moisture content pit (ω)
1. Bring on the ground that had been dug into the field laboratory
2. Take 3 small bowls of fruit and calculated weight (WC).
3. Put some soil samples dug into 3 small bowls and weigh weighing each - each (Wctb).
4. After that enter the 3 bowls which already contains the soil into the oven for ± 24 hours.
5. The next day took the cup from the oven and weigh weight (Wctk).

6. Calculate the weight of water contained in the land
Wair = Wctb - Wctk
7. Calculate the weight of dry soil excavation
WTK = Wctk - WC
8. Water content obtained by dividing the weight of water and dry soil weight multiplied by 100%
ω =
G. Determine the dry weight of the contents of the field
1. Bring the excavated soil in field and calculate the weight (Wtn.lb)
2. Calculate the height, diameter, and volume of pits.
3. Gammanya Calculate by dividing the land between the weight and volume of the hole.
γ =
4. Calculate the dry unit weight by dividing the field between the gamma and levels of water plus 1.